Products

Data Bus

Motion Control

Power Control

Transformers, Inductors & Couplers

Rad-Tolerant Solutions

Custom Solutions

Applications

Discontinued/Obsolete

54LVTH16373 3.3V ABT16-Bit Transparent D-Type Latches

Discontinued Product. Please contact the factory for the latest replacement.

Description:

Part Number(s): 54LVTH16373

DDC’s 54LVTH16373 16-bit transparent D-type latches with 3-state output features a greater than 100 krad (Si) total dose tolerance, dependent upon space mission. The 54LVTH16373 is designed for low voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment. It is suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The 54LVTH16373 can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is low, the Q output are latched at the levels set up at the data (D) inputs. When LE is high, the Q outputs follow the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state or a high impedance state. In the high impedance state, the outputs neither load nor drive the bus lines significantly. The high impedance state and the increased drive provide the capability to drive bus lines without the need for interface or pullup components. OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while the outputs are in the high impedance state.

DDC's patented RAD-PAK® packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the required radiation shielding for a lifetime in orbit or space mission. In a GEO orbit, RAD-PAK provides greater than 100 krad (Si) radiation dose tolerance. This product is available with screening up to Class S.

Features:

  • 3.3V low voltage advanced BiCMOS technology (LVT) 16-bit transparent D-type latches with 3-state outputs
  • Total dose hardness:
    • >100 krad (Si), dependent upon space mission
  • Single event effect:
    • SELTH : No LU > 119 MeV/mg/cm2
  • Package: 48 pin RAD-PAK® flat package
  • Operating temperature range:
    • -55 to 125°C
  • Distributed VCC and GND pin configuration minimizes highspeed switching noise
  • Supports mixed-mode signal operation
  • 5V input and output voltages with 3.3V VCC
  • Supports unregulated battery operation down to 2.7V
  • Typical VOLP (output ground bounce) < 0.8V at VCC=3.3V, TA=25°C
  • Latch-up performance exceeds 500mA per JEDEC standard
  • Supports live insertion
  • Bus-hold data inputs eliminate the need for external pullup resistors

Applications:

Documentation:

 Datasheet

54LVTH16373 3.3V ABT16-Bit Transparent D-Type Latches Data Sheet


 Whitepaper

How Rad Hard Do You Need? The Changing Approach To Space Parts Selection?


Proton Transport An Examination of Model and Experimental Data For Space Environment Protons


 Generic Document

DDC Custom Solutions Brochure


DDC Product Catalog


DDC Corporate Overview


Software:

Ordering Information:

Request a Quote:

Click Here to Request a Quote