Volume 10, Issue 3 March 2016

Your Solution Provider for... Connectivity, Power and Control!

DDC launches a highly customizable compact avionics interface computer and high density ARINC 429 XMC/PMC modules to address SWaP-C aerospace requirements.

New Compact Rugged Avionics Interface Computer

SWaP-Optimized, Scalable Compact Rugged Avionics Interface Computer

The new BU-67125W Compact Avionics Interface Computer (AIC-RC), offers a completely customizable, off-the-shelf solution, that can be optimized for specific application requirements, and enable faster time to market.

Features include:

  • Embedded Intel® Atom processor
    • Provides low power computing performance, programming, and flexibility
    • Enables the AIC-RC to serve high density protocol bridging and application needs
  • Qualified for rugged air and ground environments
  • Expandable: mPCIe and I/O expansion modules to support a wide range of I/Os, including:
    • Data Networking - 1553, 429/717, Ethernet, CANBus, Video
    • Power Control - Solid-State Power Controller
    • Motion Control - Motor Control, Motion Feedback
    • WiFi, GPS, Bluetooth
  • Custom front panel connector configurations
  • DDC's modes of operation:
    • Remote Access...allows easy access to 1553/429 connection via Ethernet network
    • Protocol Conversion...allows users to create embedded software that seamlessly transfers data between 1553, 429 and Ethernet interfaces

Press Release (March 16, 2016)

Product Page

Avionics Interface Computer Series
New 32 Channel ARINC 429 PMC/XMC

Cost Optimized, Scalable 32 Channel ARINC 429 PMC/XMC

The new DD-40002X high density 32-channel ARINC PMC and XMC boards, offer advanced functionality, with programmable and fixed I/O configurations to support maximum data throughput on all channels, while also providing DMA for low CPU utilization, error detection, and label filtering per channel.

Features include:

  • Programmable and fixed Tx/Rx ARINC 429 configurations
    • Provides complete flexibility to match your specific I/O channel requirements
    • Facilitates hardware in-the-loop testing and integration
  • Advanced Functionality
    • Programmable interrupts
    • Extensive Built-in-Test capability
    • Error Correcting Code (ECC) memory prevents internal data corruption
  • Efficiency
    • DMA engine for ultra low CPU & PCI/PCIe utilization
    • Continuous Built-in Test (CBIT) reduces reliance on external test equipment
  • Reliability
    • High MTBF
    • Designed for rugged environments — conduction & air cooled versions available
    • -40°C to +85°C operation

Press Release (March 1, 2016)

Product Page

Article
Multi-Protocol Avionics Systems Require Modular Systems
Modern military avionics I/O demands are exploding. Because of this diversity, many avionic platforms today find it necessary to integrate Ethernet alongside ARINC 429 and MIL-STD-1553 to meet the varied and growing data demands onboard the aircraft and to support increased bandwidth performance needs of new video processing and sensor-based systems.
Trade Shows & Events
Aircraft Interiors Expo (AIX)

April 5-7, 2016
Hamburg Messe
Hamburg, Germany
Stand 2D81

Pascall, a subsidiary of DDC, produces high performance and high reliability cabin and electronics bay power systems for the Inflight Entertainment and Connectivity (IFEC) market. Pascall and DDC will be exhibiting our power supply and other relevant DDC IFEC solutions at AIX.

Tradeshow

Invitation

Techno-Frontier 2016

April 20-22, 2016
Makuhari Messe
Tokyo, Japan
Booth # 8B-105

DDC will be showcasing our latest data bus, power control and motion control solutions for industrial automation applications. Our product line experts and executives will be at the booth to support your program development needs and answer any questions.

Tradeshow

Invitation

Xponential 2016

May 3-5, 2016
New Orleans
Louisiana
Booth # 1243

DDC will be showcasing our latest data bus, power control and motion control solutions for unmanned applications. Our product line experts and executives will be at the booth to support your program development needs and answer any questions.

Tradeshow

Invitation

Data Device Corporation (DDC) is a world leader in the design and manufacture of high-reliability Connectivity, Power and Control solutions (Data Networking; Power Distribution, Control and Conversion; Motor Control and Motion Feedback) for aerospace, defense, and industrial applications. With awards for quality, delivery, and support, DDC has served industry as a trusted resource for more than 50 years...providing proven solutions that are optimized for efficiency, reliability and performance. Data Device Corporation brands include DDC, Beta Transformer Technology Corporation, National Hybrid Inc., Pascall Electronics Ltd., and XCEL Power Systems Ltd. DDC is headquartered in Bohemia, NY and has manufacturing operations in New York, Mexico, and the United Kingdom.
Copyright © 2016 Data Device Corporation, All rights reserved.