|
|
#22 Systems Advantages of the Integrated 1553 Terminal
8 Pages, 91 KB
Rev:
#23 Processor to ACE Interfaces
20 Pages, 166 KB
Rev:
#24 ACE RT Memory Management Options
16 Pages, 119 KB
Rev:
#25 Simple Interfaces to Simple Systems
9 Pages, 98 KB
Rev:
#26 Avoiding Pitfalls Using Your MIL-STD-1553 Card
8 Pages, 61 KB
Rev:
#27 Electrical and Layout Considerations for 1553 Terminal Design
13 Pages, 106 KB
Rev: 02/06-0
#28 Understanding the ACE's Self Test Capabilites
4 Pages, 68 KB
Rev:
#29 Upgrading From ACE to MINI-ACE MIL-STD-1553 Data Bus Terminals
8 Pages, 52 KB
Rev:
#30 Methodology Primer: Designing Digital Circuits Using VHDL
8 Pages, 68 KB
Rev:
#31 MIL-STD-1553 Standards and Components: Frequently Asked Questions
25 Pages, 146 KB
Rev: 01/04
#32 Enhanced MINI-ACE Architecture Offloads Host Processor For BC Applications
20 Pages, 131 KB
Rev: 08/04
#33 33 MHZ / 32-BIT PCI BUS Interface Basics
8 Pages, 87 KB
Rev:
#34 1553 Wire-to-Fiber Converter
4 Pages, 66 KB
Rev:
#35 Enhanced Mini-Ace Built-In Self-Test
16 Pages, 101 KB
Rev:
#37 Micro-ACE-TE in Simple System RT (SSRT) Mode
56 Pages, 339 KB
Rev: 12/03
#38 Selecting the Right MIL-STD-1553 Component
3 Pages, 598 KB
Rev: 11/03
#39 AN/B-39 MIL-STD-1553 LPCC Packaged Transceivers, "A User's Guide"
4 Pages, 129 KB
Rev: 06/04
#4 Avionics Data Bus Basics
8 Pages, 55 KB
Rev:
#40 MIL-STD-1553 Introduction to Enhanced Bit Rate 1553
4 Pages, 40 KB
Rev: 10/03
#41 Converting from a BU-65565 Card to a BU-65566 Card
4 Pages, 216 KB
Rev: 08/04-0
#42 ASYNCHRONOUS MESSAGE INSERTION FOR DDC’S ENHANCED MINI-ACE SERIES
7 Pages, 65 KB
Rev: 02/06-0
#43 Integrating the BU-69090S2 Package with any VxWorks BSP
This application note will outline the
necessary modifications to the BU-
69090S2 package in order to operate on
any VxWorks-compliant Board Support
Package (BSP).
It is assumed that the reader of this
document is familiar with the Windriver
VxWorks Operating System and the
Tornado Integrated Development
Environment (IDE).
0 Pages, 205 KB
Rev: 06/07-0
#44 - Integrating the BU-69092S2 v2.0.7 Package with any VxWorks 6.x BSP
This application note will outline the necessary modifications
to the BU-69092S2 v2.0.7 package in order to operate on any
VxWorks-compliant Board Support Package (BSP).
It is assumed that the reader of this document is familiar with
the Wind River VxWorks Operating System and the Workbench
Integrated Development Environment (IDE).
6 Pages, 426 KB
Rev: 2/08-0
#45 Integrating the BU-69092S2 Package with any VxWorks 6.x BSP
This application note will outline the necessary modifications to
the BU-69092S2 v2.0.8, or newer, package in order to operate on
any VxWorks-compliant Board Support Package (BSP).
It is assumed that the reader of this document is familiar with
the Wind River VxWorks Operating System and the Workbench
Integrated Development Environment (IDE).
8 Pages, 703 KB
Rev: A
#6 DD-42900 Frequently Asked Questions
8 Pages, 43 KB
Rev:
1553 Terminals for Space Applications: BU-61582 and BU-65142
2 Pages, 1 MB
Rev:
ACE Flex-Core Architectrual Reference Guide
337 Pages, 1 MB
Rev: A
Jumper settings for the new 65539 card. This document includes additional information that may not be included in the BU-65539 manual
2 Pages, 225 KB
Rev:
MIL-STD-1553 Conduction Cooled cPCI
DDC’s BU-65566R provides a complete COTS solution for interfacing between embedded cPCI systems and MIL-STD-1553 buses. The card offers one to four dual redundant MIL-STD-1553 channels in a small 3U conduction cooled cPCI form factor. The card features a robust design with thermal vias, a heat spreading plane, and thermal interfaces that efficiently carry heat to the user’s cPCI chassis.
4 Pages, 97 KB
Rev: A
#1 Redundant Discrete Interface Devices
6 Pages, 67 KB
Rev: -
MFT-1: Testing and Troubleshooting Synchro/Resolver Converters
6 Pages, 102 KB
Rev: 06/05-0
MFT-10: Achieving High Accuracies in Two-Speed Mode with DDC Synchro/Resolver-to-Digital PCI Cards
To achieve instrument grade accuracy of
better than 1 arc-minute or resolution better
than 16 bit with Angle Position
Indication and Simulation cards, a
method called two-speed mode can be
used. Data Device Corporation’s SB-
36200IX, SB-36210IX and SB-36220IX
PCI cards include software drivers that
allow the user to easily set up two-speed
mode. This application note defines the
basics of two-speed operation and
details the implementation of this method
on PCI synchro / resolver conversion
cards.
9 Pages, 461 KB
Rev: 04/08
MFT-3: Switching Resolutions on the Fly
4 Pages, 134 KB
Rev:
MFT-5: Using DDCs RDC-19220 to Interface with LVDT and RVDT Transformers
7 Pages, 80 KB
Rev: 05/04
MFT-7: Serial Interface for RD-19230 Converter
The RD-19230 is a small, versatile, low cost, state-of-the-art, 16-bit Resolver-to-Digital (R/D) converter.The RD-19230 includes an internal synthesized reference,is available in accuracy grades to 1.3 arc minutes, includes programmable resolution for 10, 12, 14, or 16 bits, and is available in a +5 volt only option. Other features include a differential resolver input mode, externally programmable bandwidth characteristics including support for two different sets of bandwidth components, and a Built-In-Test (BIT) output.
7 Pages, 130 KB
Rev: 12/07
MFT-8 Building a Low Cost Reference Oscillator for Resolver-to-Digital Converters
This application note covers options for low-cost oscillators that are compatible with DDC Resolver-to-Digital converters.
Because DDC converters use ratiometric conversion techniques,low-cost oscillators are sufficient in operating as the reference
drives.
6 Pages, 126 KB
Rev: 04/07-0
MFT-9 Replacing medium range incremental encoders with higher reliability resolvers
8 Pages, 173 KB
Rev: 10/04-0
Motor Drives & Controllers
PW-3 Universal 3-Phase Drive for Closed-Loop Speed Control
8 Pages, 87 KB
Rev:
PW-4 Smart-Power H-Bridges Control the Speed and Torque of DC Brush Motors
4 Pages, 95 KB
Rev:
PW-6 PW-82351 Motor Drive Power Supply Capacitor Connection
8 Pages, 78 KB
Rev:
PW-7 Magnum Motor Drive Power Supply Capacitor Selection
8 Pages, 104 KB
Rev:
|
|
